Fire Doors
Fire Doors
Model R
R&S Fire Doors combine the durability, security, efficiency and space saving
advantages of a rolling service door with the added life and property saving
benefits of automatic fire protection Warnock Hersey Label is furnished
standard.
Specifications
Two years or 20,000 cycles
Face of wall or between-jamb
Push-up to 8’ wide and high and chain hoist on larger sizes is standard; awning crank, crank box or motor operation are optional.
Thermally activated by 165° fusible links, with the closing speed regulated by a governor device operative only during automatic closing.
Galvanized steel slats are 22, 20 or 18 gage, as required for size, with baked on gray polyester primer standard and stamped steel endlocks. Tan or uncoated galvanized finish available upon request.
Double steel angle footpiece with slotted assembly holes and fiber washers allow for expansion to meet listing. Painted with rust inhibiting black primer.
Structural steel angles form curtain guides and are bolted to structural steel wall angles. Slotted assembly holes and fiber washers allow for expansion to meet listing. Painted with rust inhibiting black primer.
Options
See Fire Door accessories page.
Photoelectric (detects smoke and heat) require connection to a release device (XPBB) or FDC Operator.
Brush seals factory applied to guides and footpiece, field installed on header, to aid in smoke and draft control.
Manual throw slide locks mounted to bottom bar available when non-standard for added security.
Available on all exposed surfaces.
Hot dip Galvanizing available on footpiece, guides and brackets.
Testing Agency
Warnock Hersey
Underwriters Laboratories
File Number
WHI-495-0968
R-9560-2
Hourly Rating
1 1/2 Hour Sheetrock/ 3 Hour Masonry
3 Hour
Wall Construction
Drywall or Masonry
Masonry
Jamb Type
16 ga. (min) Steel Stud
Steel Tube, Wood Stud,
Concrete, Block Brick
Concrete
Block
Brick
Label size
12’ Wide
12’ High
120 Sq. Ft. Max
12’ Wide
12’ High
120 Sq. Ft. Max
Oversize
24’ Wide
24’ High
576 Sq. Ft. Max.
24’ Wide
24’ High
576 Sq. Ft. Max.
Jambs must be continuous members from floor to structure above. Sizes and attachment of members is to be determined to provide adequate mounting and support for the size and weight of the door.
Standard Clearance Requirements
Mounting Details
Model Designation
By Method of Operation
Face of Wall Mount
- RFP – Push-Up
- RFC – Chain
- RFT – Thru-wall chain
- RFA – Awning Crank
- RFB – Crank Box
- RFM – Motor
- (For Between-Jamb Mount,
change letter ‘F’ to ‘J’.)
See All Our Featured Rolling Doors and Grilles
Service Doors
Fire Doors
Counter Doors
Counter Fire Doors
Aluminum Counter Doors
Aluminum Grilles
End-to-End Garage Door and Gate Services in Vallejo, CA
No matter what your garage door, commercial door, or gate system needs, R&S Erection of Vallejo is your single source for expert installation, repair, and maintenance. We serve homeowners, business owners, property managers, and facility operators across Napa and Solano Counties with solutions built to last.
Explore our full list of garage door services.
What Our Customers in Vallejo, CA Are Saying About Our Garage Door Services
For over 45 years, homeowners and business owners across Napa and Solano Counties have trusted R&S Erection of Vallejo for dependable garage door service. Don’t just take our word for it, hear what our customers have to say.
Garage Door and Gate Services in Vallejo, CA and Surrounding Areas
R&S Erection of Vallejo is your go-to for garage door help in Vallejo, CA and nearby areas. Our team is local, responsive, and ready to help whenever you need garage door or gate service.
Looking for a garage door company near me in Vallejo, CA? Our team covers all of the areas listed below and is ready to help.
Can’t see your location on the list? Give us a call. We will check and let you know if we have service in your area.